Multimeter Hall Effect Current Clamp , Low 200a Clamp On Current Transformer For Oscilloscope

 
 
XQ20 AC Split Core 200a Clamp On Current Transformer for Multimeter Accuracy Class 0.1
 
 
Current probes are typically used to read the magnitude of alternating current (AC) and, with additional instrumentation, the phase and waveform can also be measured. Some clamps meters can measure currents of 1000 A and more.
The model XQ20 clamp on current sensor is suitable for 200A cable online measurement, the user friendly shape make It easily clamp onto cables or bus bars.
 
 
 
 
Applications
 
The XQ20 AC Current Probe is designed for easy installed in tight spaces and without the need for dismantling the primary busbar or cables. The sensing head uses sliding push-fit clamp structure, safety isolation to avoid the user to contact with charged objects directly. It complies with CE standards and meets 600V CAT III safety class. it can measure from 1mA to 240A, class 0.1 with 2.5m cable, good linear & low phase shift, this model XQ20 current probe is the best current clamp in the world. 
 
Three precision dual range current clamps (20 A/200 A) for secondary current transformer applications.... GFUVE Set of 3 20 A/200 A Current Clamps Expand the capabilities of the GFUVE GF438II and GF312V2 Series Loggers with the dual-range 20 A/200 A
 
GFUVE Current transformer clamp meters are equipped with rigid jaws of made of ferrite iron. The jaws are individually wrapped by coils of copper wire. Together, they form a magnetic core during measurements. Their basic operation is like that of a transformer. It works with one primary turn, or winding, which in nearly all cases is the conductor .
 
 
 
Features
 
1. Suitable for 200A cable online measurement.
2. Holding wire diameter: φ20mm
3. Dimension: 52.5mm×137.5mm×28mm
4. Load capacity: ≤4Ω
5. Installation: clamp type
6. Output mode: lead output
 
 
 
PARAMETERS
 

 
SELECTION

 
Photo